Call Now: (314) 524-2040
Made In USA
Made In USA
Request a Quote Project Estimator

How do you cut your panels?

Cutting URESTONE faux stone, faux brick, and faux wood panels is simple. Our lightweight 4×8 panels, wainscot panels, 2×8 panels, and 2×4 panels cut with common woodworking tools, which makes DIY installation fast for fireplaces, accent walls, wainscot, metal buildings, exterior façades, and more.

Details

  • Recommended tools: circular saw or track saw for long straight cuts, miter saw or table saw for trim and corners, oscillating multi-tool for small notches, caulking gun for caulk, and a drill for screws

  • Blades: fine-tooth carbide wood blade on circular saw or miter saw; 40–60T on 7-1/4 inch blades works well. Use 10–14 TPI wood or laminate blades on a jigsaw for cleaner edges

  • Cut setup: mark from the face, support the panel fully on a sacrificial board, and clamp to prevent vibration. For circular saws, place the finished face down to minimize surface chipping. For jigsaws, use a reverse-tooth blade or cut with the finished face down

  • Straight cuts: score your line with a utility knife, apply painter’s tape over the cut line, and feed steadily without forcing the blade. Test scrap first to confirm feed rate and edge quality

  • Openings and curves: drill a starter hole, then follow the line with a jigsaw. For electrical boxes, vents, hose bibs, or sconces, trace the trim plate and cut slightly inside the line for a snug fit

  • Corners and seams: miter 45 degrees where desired, or use keyless corners and end caps for a clean finish. Dry-fit to align interlocking edges before final fastening

  • Edge finishing: lightly sand cut edges. Seal exposed foam as directed and touch up with color-matched paint from our accessory kits for a continuous stacked stone look

  • Fastener prep: pre-drill near edges to reduce the chance of micro-cracks. Maintain recommended screw spacing and use construction adhesive plus screws for best bond

  • Safety: wear eye protection, hearing protection, and a dust mask. Cut in a well-ventilated area and keep hands clear of the blade path

  • Help resources: see our step-by-step installation and cutting videos for stacked stone, brick, and wood textures on FauxStoneSheets.com

If you share your project photos or a quick sketch with measurements, we can suggest an efficient cut plan that reduces seams and waste for your specific panel style and layout.

Call our office at (314) 524-2040 or email sales@repunlimited.com for additional assistance or guidance.