- Amount Recommendations
The use of adhesive should not be used directly over applications that are using building wrap or waterproofing sheets.
All surface areas must be clean, dry and free of oily or loose material for optimum results.
It can also be used for attaching the URESTONE panels directly to insulation boards, construction boards (plywood, OSB, cement board) and existing EFIS systems when building wraps are not necessary. The use of adhesive can reduce the amount of screws in the range of 25—35 %.
Adhesive is optional for interior applications and will also reduce the amount of screws required by 35—50%.
Type of Adhesive
Our primary adhesive recommendation is a polyurethane construction adhesive such as PL Polyurethane Adhesive.
We do not recommend non polyurethane construction adhesives or similar general purpose adhesives.
Amount of Adhesive
The amount of required adhesive is more critical for exterior applications than interior applications due to wind uplift issues and expansion / contraction issues. Apply a minimum 3/8” bead to the backside of the panel and apply the adhesive similar to figure 5.3 in sections that will allow water to channel behind the panel and to eliminate being trapped.